Amps, Pedals and Harp Setup

The Ultimate Electric Harp Setup: Amps, Effects Pedals & Signal Flow

Ever felt intimidated by a wall of amplifiers or a messy pedalboard? We thought we'd open up the secrets of the ultimate electric harp setup using Harp-E.

This step-by-step tutorial is based on a video recorded by the inventor of Harp-E and DELTA Joris Beets, breaks down the wonderful, sometimes chaotic world of amps, pedals, and signal flow. Having gigged all over the planet, Joris learned it all the hard way through tons of trial and error so you can skip the headaches and get straight to pristine tone. 

 

1. CONNECTING YOUR HARP TO AN AMP

Let's start by connecting your harp to an amplifier. You'll need a 1/4" instrument cable, ideally with an L-shaped end. The angled cable will prevent potential damage to the harp's internal electronics if the wire is accidentally pulled.

Plug the straight end of the 1/4" cable into a channel on the amplifier and power it on.


Amplifiers come in all different shapes and sizes, but the connection process is always straightforward. Every amp you'll encounter has at least one 1/4" instrument cable input—that's all you need to plug your Harp-E in and start playing through it.

 

2. ADDING EFFECTS PEDALS

Adding effects pedals opens up endless creative possibilities. Whatever you choose to use, the core principle of connecting it to your harp remains the same.

To connect a pedal between the harp and the amp, unplug the cable from the amp and insert it into the "input" (right side) of the pedal. Use a second instrument cable to connect the "output" (left side) of the pedal back to the amplifier's input.

Joris adding an effects pedal between the Harp-E V4 and it's amplifier with 2 instrument cables

This creates a "signal chain"—the complete path your sound travels from the Harp-E, through each effects pedal in sequence, and finally out through your amplifier to the audience. Understanding signal flow is key to building a setup that sounds cohesive and responds predictably to your playing.

 

3. ADDING MULTIPLE PEDALS

Adding multiple pedals follows the same principle: each new pedal becomes another link in the chain. The output of one pedal feeds directly into the input of the next. This means the order matters. A reverb pedal placed before a delay will sound different than the same two pedals in reverse order—experimenting with pedal placement is where you'll discover your signature tone.

Our advice - start simple with one or two pedals to get comfortable with how they interact with your harp and amp. Once you've developed an ear for signal flow, you'll find it easy to build more complex rigs with confidence.

 

4. POWERING YOUR PEDALS

Pedals require power adapters that match their specific voltage and polarity requirements (e.g., 9V, center negative vs. center positive). Always check the technical specifications on both the pedal and the adapter to avoid damage. Most standard effects pedals run on 9V DC power, though some larger units or multi-effects processors may require different voltages entirely—so it's critical to verify before plugging anything in.

Power being supplied to the effect pedal after carefully reading the label to ensure the proper voltage

When selecting a power adapter, look for the input specifications printed on the pedal's housing or in its manual. The voltage must match exactly, and the polarity (the direction of current flow through the centre pin) matters just as much. A centre-negative adapter is the industry standard for most guitar and harp effects pedals, but always confirm this on your specific unit. Using an incompatible adapter can permanently damage the pedal's internal circuitry.

Quality matters here. A reliable, well-shielded power adapter minimises electrical noise that can introduce hum or interference into your signal. Cheap or damaged adapters are a common culprit behind mysterious buzzing sounds that ruin an otherwise great tone. Invest in a dedicated power solution designed for musical equipment, and you'll save yourself countless troubleshooting sessions down the road.

 

5. CONNECTING MULTIPLE EFFECT PEDALS

Once you've mastered the fundamentals of your Harp-E signal chain, the next step is expanding your sonic palette with advanced effects and power management strategies.

As your setup grows in complexity, understanding how to layer multiple effects, combine them strategically, and power them efficiently becomes essential to maintaining a clean, professional rig.

Additional pedals including an expression pedal have been added to create an even wider range of sounds for the Harp-E

Modulation effects like chorus, phaser, and flanger can add movement and character to your harp's natural tone. Time-based effects such as delay and reverb create space and dimension, allowing you to transform your sound from intimate and dry to lush and expansive.

The key is experimenting with how different effects interact when placed in different positions within your signal chain—a compressor before your overdrives will behave differently than one placed after, for example.

A "daisy chain" is being used to supply all of the pedals with a flow of power from one source

Expression pedals are a game-changer for dynamic, real-time control. By connecting an expression pedal to a compatible effects unit, you can sweep parameters like reverb decay, delay feedback, or modulation intensity with your foot, giving you expressive control that mirrors the fluidity of playing a traditional acoustic harp. 

 

6. MANAGING POWER (AND CLUTTER!)

As your pedalboard grows, managing power becomes increasingly important. Rather than plugging individual wall adapters into multiple outlets—which creates clutter, cable mess, and potential grounding hum—a daisy chain cable allows you to distribute power from a single, high-quality source to multiple pedals simultaneously.

This streamlined approach reduces electrical noise, eliminates ground loops, and keeps your setup organized. Just verify that your combined pedals don't exceed the total amperage your power supply can provide.

7. EXPERIMENTING FURTHER

Building the ultimate electric harp setup doesn't have to feel overwhelming. By mastering these core principles—clean cable connections, smart signal flow, proper pedal power management, and strategic effect placement—you've laid the foundation for a rig that sounds professional and responds intuitively to your playing style.

The journey from your first amp connection to a complex multi-pedal stereo setup is one of gradual experimentation and discovery. Start simple, listen carefully to how each addition shapes your tone, and don't hesitate to rearrange your signal chain when something doesn't feel right. Every great player has spent countless hours tweaking their setup, and that hands-on learning is where the magic happens.

 


 

Back to blog